Induction Kit for EA888 Gen 3 & Gen 4 Engine (FMINDK44)

This kit delivers optimized airflow and improved engine response for the EA888 Gen 3 and Gen 4 2.0 TSI platform. Designed for performance and reliability, it is compatible with a wide range of MQB vehicles and fits seamlessly using either the OEM turbo elbow or Forge Motorsport high-flow silicone elbows (FMTIA5/FMTIA6/FMTIA9).

Gives superior flow and filtration with enhanced breathing for the 2.0 turbo charged engine and features a larger surface area than the stock filter and many competitors’ alternatives.
The intake diameter has been carefully tuned to provide exactly the correct quantity of air for consistent power gains throughout the rev range and minimising the chance of low-end torque loss; the pipework is specifically designed to feed the turbo without interruption.
The heat shroud fits round all the contours of the engine bay. This, in addition to the specially formulated thermal coatings, protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing.

Key Features:

Filter Options: Ramair high-flow pleated synthetic nanofiber or Pipercross foam, engineered for maximum airflow and filtration.
Optimized Airflow: Intake diameter and pipework tuned to maintain consistent power throughout the rev range without sacrificing low-end torque.
Enhanced Induction Acoustics: Produces a sportier intake sound under acceleration.
Thermal Management: CAD-designed heat shield with thermal coating protects the intake from radiant heat while directing cold air from the OE ducting.
Performance Gains: On-stock EA888 Gen4 engines, average gains of 3.5BHP; when combined with compatible turbo inlets, up to 13BHP at 6500RPM and 17Nm torque improvement. Gains may be higher on tuned vehicles.
IAT Reduction: Utilizes OEM cold air feeds and shield design to lower inlet air temperatures, improving combustion efficiency and engine reliability.
Fitment & Installation: Complete kit with all hardware and full-color instructions; installation takes approximately 1 hour. Designed to fit multiple vehicles sharing the EA888 platform without modification.
Durability: P-clip and tab secure OEM inlet hoses to prevent damage and rattling.